Maximum Motorsports Stainless Brake Hose Kit, 1979-93 Mustang with SN95 calipers, front MMBK8F

Maximum Motorsports
SKU: MMBK8F
Availability: Out of stock
$84.95




Maximum Motorsports Stainless Steel braided, PTFE-lined Front Brake Hose Kit.

Designed for SN95 brake caliper swaps. Connects OEM front calipers fitted to 1994-04 Mustangs (except 2000 Cobra R) onto the 1979-1993 Mustangs listed below. SN95 spindles and other parts are required to complete this swap.

Fits
SN95 front calipers swapped to a 1979-1993 Mustang having 7/16"-24 tube nuts on the front brake hard lines. Except for the cars listed below, all 1979-1993 Mustangs are so equipped.

Does NOT fit
This SN95 caliper swap hose kit does NOT fit a 1979-1981 Mustang chassis that was originally fitted with a 2.3L normally-aspirated engine or 2.8L engine. These Mustangs were originally equipped with extremely small front brake rotors, only 9.3" in diameter, and had front brake hard line fittings on the chassis with tube nuts having 3/8"-24 threads.

Note
Minor modifications to the chassis hose-mounting tabs may be required.

PTFE-lined, braided stainless steel hoses improve performance over stock rubber hoses by providing

  • A firmer brake pedal.
  • Quicker braking response.
  • Easier brake modulation.

This kit includes

  • Two brake hoses with 7/16"-24 threads for the hardline tube-nut connection
  • One pair of coarse-thread fluid bolts (M10 x 1.5)
  • One pair of fine-thread fluid bolts (M10 x 1.0)
  • Four copper sealing washers
  • Complete installation instructions

MM also carries high performance brake fluid.

For more details and technical information, scroll down.

Features of MM brake hoses

  • The hose end can swivel at the chassis prior to tightening. This allows perfect alignment between the chassis hose-mounting tab and the caliper's banjo fitting.
  • A brake fluid-resistant clear urethane covering helps protect the stainless steel braid.
  • DOT approved

Ford used both coarse-thread and fine-thread fluid bolts during the 1994-04 production years. We include both types of fluid bolts to ensure that you will have what is needed for your Mustang.

Braided stainless steel hoses are considered a safety requirement for any car that is raced. The high heat generated during track use has been known to cause failure of the stock rubber hoses.

Maximum Motorsports was the first with direct replacement stainless steel brake hoses for Mustangs, offering them since 1993.